Characteristics
Type: diaphragm valve with 2 ways
Operation: manual
Instalation:
– Diaphragm valve with solvent welding code VMDC
– Diaphragm valve with flanges on both ends code VMOC/VMOAC
Available diameters:
– DN80 – DN100 mm (nominal diameter)
– d90 – d110 mm (external diameter)
Sealing gasket: EPDM, FPM si PTFE

pvc-c-robinet-cu-diafragma-vm-dn80-dn100

Aplications: used in different installations where high chemical resistance is required to different chemical agents
– Chemical industry
– Food industry
– The metal coating industry (galvanizing, chroming, etc.)
– Chlorination station and watertreatment systems
– Swimming pools
Range of working temperature: 0 – 95° C
Pressure: PN10

Properties:
The VM is particularly suitable for isolating and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum.

  • Connection system for solvent welding and for flanged joints
  • Optimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body
  • Handwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torque
  • Standard optical indicator
  • Internal operating components in metal totally isolated from the conveyed fluid
  • Bonnet fastening screws in STAINLESS steel protected against the external environment by PE plugs
  • New flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance.

MAIN FEATURES:
Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageability
Metal optical position indicator supplied as standard
Full protection bonnet in PP-GR. Internal circular and symmetrical diaphragm sealing area Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace
Threaded metal inserts for anchoring the valve
New valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation