Type: butterfly valve
Operation: manual
– Butterfly valve with manual handle code FEOV/LM
– Butterfly valve with gearbox and lever code FEOV/RM
Instalation: between flanges
Available diameters:
– DN40 – DN200 mm (nominal diameter)
– D50 – d225 mm (external diameter)
Sealing gasket: EPDM or FPM
Aplications: used in different installations where chemical resistance is required to different chemical agents


Chlorination station and watertreatment systems
– Swimming pools
Range of working temperature: 0 – 60° C
Pressure: PN16

The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System.


  • Disk in PVC-U with through shaft
  • Zinc plated square section steel stem completely isolated from the fluid complying with standard ISO 5211:

DN 40 ÷ 65:         11 mm

DN 80 ÷ 100:       14 mm

DN 125 ÷ 150:     17 mm

DN 200:                22 mm

  • Can also be installed as an end line valve, bottom discharge valve or tank dump valve
  • The wafer valve can be transformed into a one-way Lug body valve thanks to the set of zinc plated steel inserts available as an optional extra
  • Valve material compatibility (PVC-U) with water conveyance, drinking water and other food substances according to current regulations
  • Possibility of directly installing a gearbox or pneumatic and/or electric actuators with a standard drilling pattern according to standard ISO 5211 F05, F07, F10


Ergonomic multifunctional handle in HIPVC with the option for quick operation, graduated adjustment in 12 positions (every 7.5°). 180° reversible mounting

Customisable Labelling System: integrated module, made of a transparent protection plug customisable tag holder

using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to the specific needs

Drilling pattern with oval slots that allow coupling to flanges according to numerous international standards

Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid.

One-piece top flange with PVC-U rack. Drilling according to standard ISO 5211 for direct drive:

DN 40 ÷ 65: F05

DN 80 ÷ 150: F07

DN 200: F10