The FEOV is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System.

In addition to manually operated version, the FE is also available in configuration with electrical actuator FE/CE.

FEOV/CE are produced using actuators complying with current regulations and selected by FIP according to its requirements of quality and reliability.

Characteristics

Type: butterfly valve

Technical documentation

Operation: electric actuated

Electric actuator produced on FIP specifications:

– Standard delivery

– Manual override and optical position indicator standard supplied standard.

– 2 Limit switches standard supplied.

– Accesories

– positioner 4-20 mA or 0-10 V

– fail safe unit

– heating resistor

– position feedback

– IP67 or ATEX execution

Material: PVC-U

Instalation: between flanges

Available diameters:

  • DN40 – DN200 mm (nominal diameter)
  • D50 – d225 mm (external diameter)

Sealing gasket: EPDM or FPM

Aplications: used in different installations where chemical resistance is required to different chemical agents

Chlorination station and watertreatment systems

  • Swimming pools

Range of working temperature: 0 – 60° C

Pressure: PN16

Properties:

  • Disk in PVC-U with through shaft
  • Zinc plated square section steel stem completely isolated from the fluid complying with standard ISO 5211:

DN 40 ÷ 65:         11 mm

DN 80 ÷ 100:       14 mm

DN 125 ÷ 150:     17 mm

DN 200:                22 mm

  • Can also be installed as an end line valve, bottom discharge valve or tank dump valve
  • The wafer valve can be transformed into a one-way Lug body valve thanks to the set of zinc plated steel inserts available as an optional extra
  • Valve material compatibility (PVC-U) with water conveyance, drinking water and other food substances according to current regulations